EBSO EasyCut Depanelizers – PCB Singulation Solutions

EasyCut 100 – N 100 PCB Nibbler

PCB N 100 Nibbler – Stegtrenner

The N 100 PCB Nibbler for routed Printed Circuit Cards is ideal for low to medium volume production or as back up for your expensive capital equipment.

The NIBBLER SINGULATION TOOL separates routed PCBs carefully and economically. With a pneumatic operating tool, the strips are separated without any residues and the PCB is cut out. The PCB is led with the milled slot over the cutting tool. The strip is moved under the cutting knife and by pressing the foot valve the strips are separated. The cut tabs are accumulated inside the Nibbler and can be discarded at operator’s convenience.

Technical Data

Dimensions: 170 × 114 × 114 mm
Weight: 3 kg
Compressed Air: 6 – 8 bar
PCB Thickness: max. 2.5 mm
Width of knives: 1.5 mm / 2.3 mm / 3.0 mm (other knives available)

EasyCut 300 / EasyCut 300 M – Manual or Motorized PCB Depanelizer

For Boards up to 300 mm length

Manual and Motorized Circular Blade Depanelizer. The EasyCut 300M has two operating speeds where the lower blade is powered and pulls the PCB panel between the two blades for singulating the panels. The PCB is fed up to the blades by hand and then independently transported between the blades and separated. Both the EasyCut 300 and EasyCut 300M depanelizers will separate PCBs of up to 13” in length.

EasyCut 450 – Manual Circular / Linear Blade Depanelizer

For PCBs up to 450 mm length

Both large and small PCBs can be separated in an economically viable manner by LINEAR BLADE PCB DEPANELIZERS. The PCB is laid onto the linear blade with the edge of the blade located into the scored groove in the PCB. Passing the blade across the PCB will separate it into individual units. The scored grooves can be interrupted by any number of cut-outs.

Technical Data

Downloads

→ EBSO Preforming Catalog (PDF)