Combined 3D/2D Inspection • Up to 360 Angled-View Directions • 12 µm Resolution • Up to 100 cm²/s • MagicClick
The GÖPEL Vario Line and Vario Line · 3D are flexible inline AOI systems with maximum fault detection through combined 3D/2D technologies. An orthogonal camera with telecentric optics and 45° angled-view cameras with up to 360 inspection directions capture every solder joint.
With the 3D·ViewZ camera module, MagicClick generates the AOI test program automatically, and variable data interfaces integrate the system into the production process, MES and traceability.
| Parameter | Specification |
|---|---|
| 2D Orthogonal Inspection | orthogonal camera, pixel-adapted telecentric optics, up to 48 megapixels, 24-bit colour |
| 2D Angled-View Inspection | 45° angled-view cameras with adapted focal plane, up to 360 inspection directions, up to 48 MP each |
| 3D Measurement | camera module 3D·ViewZ (Vario Line 3D) |
| X/Y Resolution (2D) | 12 µm |
| Illumination | multi-spectral, multi-directional |
| Component Clearance | above PCB 40 mm, below PCB 50 mm |
| Inspection Speed | up to 100 cm²/s |
| Max. Inspection Area | 520 mm (900 mm optional) × 500 mm; 330 mm in 3-segment operation |
| Max. PCB Weight | 5 kg |
| PCB Width | max. 510 mm, min. 80 mm (50 mm optional) |
| Transport | 1 segment / 3 segments (optional); left-right, right-left, left-left, right-right |
| Inline Interface | SMEMA, Siemens, HERMES |
| Power Supply | 230 V AC / 1.2 kVA, compressed air 6 bar, < 20 l/h |
| Dimensions (W×D×H) | 1200 × 1450 × 1650 mm |
| Weight | approx. 950 kg |
→ Request the datasheet, a demonstration or a quotation
InterElectronic is the GÖPEL electronic partner for sales, installation and service in Hungary and the region.
Source: GÖPEL electronic official materials • November 2026
