GÖPEL Multi Line SPI Solder Paste Inspection

GÖPEL Multi Line SPI – 3D Inline Solder Paste Inspection

Fringe Projection 3D • 01005 Deposits • 0.2 µm Z Resolution • Program in < 10 min • Closed Loop to the Printer

Overview

GÖPEL Multi Line SPI Solder Paste Inspection

The GÖPEL Multi Line SPI is a cost-effective 3D inline solder paste inspection system on the Multi Line platform, ideal for small and medium-sized companies with high quality standards. It measures shape, area, volume, coplanarity, height, bridges and X/Y offset of every deposit.

High-precision fringe projection with double-sided projection gives 100% shadow-free measurement. Test programs are ready in less than 10 minutes, and a closed loop to the solder paste printer and the link to AOI/AXI data at the verification station close the process.

 

Key Features

  • Precise 3D measurement: shape, area, volume, coplanarity, height, bridges and X/Y offset, down to 01005 deposits
  • Fringe projection: 8-megapixel camera at 180 frames/s with double-sided projection for 100% shadow-free measurement
  • Fast programming: test program generation typically under 10 minutes, offline programming, Gerber, CAD and ODB++ import
  • Process optimisation: repeatable measurement, statistical process control and closed loop to the printer
  • Linked data: SPI and AOI/AXI data combined at the verification station
  • Multi Line platform: inspection area 540 × 450 mm, carriers up to 620 × 510 mm and 15 kg

Technical Specifications

Parameter Specification
Measurements shape, area, volume, coplanarity, height, bridges, X/Y offset
Smallest Solder Deposit 01005
Camera / Projector 8 megapixels, 180 frames/s, double-sided projection
X/Y Resolution 15 µm
Z Resolution 0.2 µm
Z Measuring Accuracy (on target) up to 1 µm
Z Measuring Range 1000 µm
Inspection Speed up to 51 cm²/s
Volume Repeatability < 0.5% at ±3σ (calibration target), < 2% at ±3σ (PCB)
Gage R&R < 10% at 6σ
Illumination multi-spectral, multi-directional, for fiducial and barcode / 2D code recognition
Max. Board Deflection ±5 mm
Test Program Generation typically < 10 minutes, offline programming
Data Import Gerber (RS-274-X, RS-274-D), CAD, ODB++
Closed Loop to the solder paste printer
Max. Inspection Area 540 × 450 mm
Max. Carrier Size up to 620 × 510 mm
Max. Transport Weight 15 kg
Transport conveyor belt with or without carriers; left-right, right-left, left-left, right-right
Inline Interface SMEMA, HERMES, Siemens, sensor
Power Supply 230 V AC / 2 kVA, compressed air 6 bar, < 20 l/h
Dimensions (W×D×H) 1150 × 1300 × 1800 mm
Weight approx. 800 kg

Datasheet and Quotation

→ Request the datasheet, a demonstration or a quotation

InterElectronic is the GÖPEL electronic partner for sales, installation and service in Hungary and the region.

Source: GÖPEL electronic official materials • November 2026


AJÁNLOTT TERMÉK INTEON 3 years warranty