DOGA • 0.02–9.8 N·m • 73 Models in 13 Series • Brushless GX / GY, Brush GA / DO • Straight, Pistol and Spindle • ESD Protection on Most Models
DOGA electric shut-off screwdrivers and spindles are built for precision, ergonomics and robustness. The clutch shuts the motor off when the set torque is reached, and the digital speed adjustment and soft start keep every joint repeatable, so you produce quality assemblies while keeping production costs down.
The range covers 0.02 to 9.8 N·m: the brushless GX series from very low to common torques, the brushless GY and PGY series for high-speed vertical and horizontal screwdriving, the GXA and GYA spindles for automatic machines and robots, and the light brush-motor GA and DO screwdrivers.
Torque, speed, start, drive, voltage, weight and DOGA order code of every model, grouped by series, with the matching controller (source: DOGA catalogue DOC. 60207.11/26).
| Model | Torque (N·m) | Speed (rpm) | Start | Drive | Voltage (V) | Weight (kg) | Code |
|---|---|---|---|---|---|---|---|
GX micro-torque series - Brushless straight screwdriversController: XS-40D |
|||||||
| GX 035 ESD | 0.02–0.34 | 300–1100 | Lever | half-moon, 4 mm | 30 | 0.24 | P100446 |
| GX 035 mini angle nutrunner, 0.6 Nm max | 0.4–0.6 | 15–55 | Lever | Torx 6 / 8 bit | 0.36 | P215436 | |
| GX 045 ESD | 0.04–0.45 | 300–700 | Lever | half-moon, 4 mm | 30 | 0.24 | P100270 |
Standard GX series - Brushless straight screwdriversController: XS-40D |
|||||||
| GX 80 ESD V2 | 0.09–0.8 | 450–1000 | Lever | Hex 1/4" | 30 | 0.43 | P100044 |
| GX 80 P ESD V2 | 0.09–0.8 | 450–1000 | Push to start | Hex 1/4" | 30 | 0.43 | P100241 |
| GX 120 ESD V2 | 0.2–1.2 | 300–700 | Lever | Hex 1/4" | 30 | 0.43 | P100010 |
| GX 120 P ESD V2 | 0.2–1.2 | 300–700 | Push to start | Hex 1/4" | 30 | 0.43 | P100105 |
| GX 150 ESD-H | 0.3–1.47 | 800–1700 | Lever | Hex 1/4" | 40 | 0.60 | P100098 |
| GX 150 P ESD-H | 0.3–1.47 | 800–1700 | Push to start | Hex 1/4" | 40 | 0.60 | P100083 |
| GX 220 ESD-H | 0.6–2.15 | 600–1200 | Lever | Hex 1/4" | 40 | 0.60 | P100016 |
| GX 220 P ESD-H | 0.6–2.15 | 600–1200 | Push to start | Hex 1/4" | 40 | 0.60 | P100025 |
| GX 450 ESD-H | 1–4.41 | 300–600 | Lever | Hex 1/4" | 40 | 0.62 | P100011 |
| GX 450 P ESD-H | 1–4.41 | 300–600 | Push to start | Hex 1/4" | 40 | 0.62 | P100023 |
GXS series - Brushless straight screwdriversController: XS-40D |
|||||||
| GXS 80 ESD V2 | 0.09–0.8 | 450–1000 | Lever | Hex 1/4" | 30 | 0.43 | P101709 |
| GXS 120 ESD V2 | 0.2–1.2 | 300–700 | Lever | Hex 1/4" | 30 | 0.43 | P100553 |
| GXS 150 ESD-H | 0.3–1.47 | 800–1700 | Lever | Hex 1/4" | 40 | 0.60 | P102475 |
| GXS 220 ESD-H | 0.6–2.15 | 600–1200 | Lever | Hex 1/4" | 40 | 0.60 | P101405 |
GXT series - Brushless straight screwdriversController: XS-40D |
|||||||
| GXT 80 ESD V2 | 0.09–0.8 | 450–1000 | Lever | Hex 1/4" | 30 | 0.43 | P103202 |
| GXT 120 ESD V2 | 0.2–1.2 | 300–700 | Lever | Hex 1/4" | 30 | 0.43 | P100367 |
| GXT 150 ESD-H | 0.3–1.47 | 800–1700 | Lever | Hex 1/4" | 40 | 0.60 | P103529 |
| GXT 220 ESD-H | 0.6–2.15 | 600–1200 | Lever | Hex 1/4" | 40 | 0.60 | P100968 |
| GXT 450 ESD-H | 1–4.41 | 300–600 | Lever | Hex 1/4" | 40 | 0.62 | P100450 |
GX FS series - Brushless straight screwdriversController: XS-40D |
|||||||
| GX 60 FS ESD | 0.1–0.6 | 1550 | Lever | Hex 1/4" | 30 | 0.44 | P109110 |
| GX 60 FSP ESD | 0.1–0.6 | 1550 | Push to start | Hex 1/4" | 30 | 0.44 | P107077 |
| GX 80 FS ESD | 0.2–0.8 | 1250 | Lever | Hex 1/4" | 30 | 0.44 | P103190 |
| GX 80 FSP ESD | 0.2–0.8 | 1250 | Push to start | Hex 1/4" | 30 | 0.44 | P104980 |
| GX 120 FS ESD | 0.3–1.2 | 1000 | Lever | Hex 1/4" | 30 | 0.44 | P100936 |
| GX 120 FSP ESD | 0.3–1.2 | 1000 | Push to start | Hex 1/4" | 30 | 0.44 | P102302 |
| GX 180 FS ESD | 0.4–1.8 | 700 | Lever | Hex 1/4" | 30 | 0.44 | P100242 |
| GX 180 FSP ESD | 0.4–1.8 | 700 | Push to start | Hex 1/4" | 30 | 0.44 | P101230 |
GX BT series - Brushless straight screwdriversController: XS-35D |
|||||||
| GX 35 BT ESD-G | 1–3.4 | 700–1500 | Lever | Hex 1/4" | 35 | 0.92 | P101533 |
| GX 50 BT ESD-G | 2–4.9 | 600–1050 | Lever | Hex 1/4" | 35 | 0.92 | P101024 |
| GX 100 BT ESD-G | 4–9.8 | 150–550 | Lever | Hex 1/4" | 35 | 0.92 | P100049 |
GXD series - Brushless straight screwdriversController: none, direct 230 V connection |
|||||||
| GXD 180 | 0.4–1.75 | 1400 | Lever | Hex 1/4" | 230 | 0.97 | P205299 |
| GXD 180P | 0.4–1.75 | 1400 | Push to start | Hex 1/4" | 230 | 0.97 | P205300 |
| GXD 250 | 0.7–2.45 | 1100 | Lever | Hex 1/4" | 230 | 0.97 | P205301 |
| GXD 250P | 0.7–2.45 | 1100 | Push to start | Hex 1/4" | 230 | 0.97 | P205302 |
| GXD 350 | 1.1–3.45 | 790 | Lever | Hex 1/4" | 230 | 0.97 | P218399 |
| GXD 350P | 1.1–3.45 | 790 | Push to start | Hex 1/4" | 230 | 0.97 | P218402 |
GXA series - Brushless spindlesController: XS-40D FA |
|||||||
| GXA 035 ESD V2 | 0.03–0.35 | 300–1100 | External | half-moon, 4 mm | 30 | 0.45 | P104972 |
| GXA 045 ESD V2 | 0.04–0.45 | 300–700 | External | half-moon, 4 mm | 30 | 0.45 | P167806 |
| GXA 080 ESD V2 | 0.1–0.8 | 450–1000 | External | Hex 1/4" | 30 | 0.45 | P103207 |
| GXA 120 ESD V2 | 0.2–1.2 | 300–700 | External | Hex 1/4" | 30 | 0.45 | P101624 |
| GXA 150-H | 0.3–1.47 | 800–1700 | External | Hex 1/4" | 40 | 0.72 | P102506 |
| GXA 150P-H | 0.3–1.47 | 800–1700 | Push to start | Hex 1/4" | 40 | 0.72 | P109082 |
| GXA 220-H | 0.6–2.15 | 600–1200 | External | Hex 1/4" | 40 | 0.72 | P101535 |
| GXA 220P-H | 0.6–2.15 | 600–1200 | Push to start | Hex 1/4" | 40 | 0.72 | P104971 |
| GXA 450-H | 1–4.41 | 300–600 | External | Hex 1/4" | 40 | 0.74 | P100787 |
| GXA 450P-H | 1–4.41 | 300–600 | Push to start | Hex 1/4" | 40 | 0.74 | P102923 |
GY series - Brushless straight screwdriversController: XT-35D |
|||||||
| GY 35 ESD-G | 1–3.4 | 500–1500 | Lever | Hex 1/4" | 35 | 0.8 | P101804 |
| GY 35P ESD-G | 1–3.4 | 500–1500 | Push to start | Hex 1/4" | 35 | 0.8 | P101708 |
| GY 50 ESD-G | 2–4.9 | 400–1100 | Lever | Hex 1/4" | 35 | 0.8 | P101285 |
| GY 50P ESD-G | 2–4.9 | 400–1100 | Push to start | Hex 1/4" | 35 | 0.8 | P102490 |
| GY 100 ESD-G | 4–9.8 | 250–500 | Lever | Hex 1/4" | 35 | 0.85 | P100320 |
PGY series - Brushless pistol screwdriversController: XT-35D |
|||||||
| PGY 35 ESD-G | 1–3.4 | 500–1500 | Trigger | Hex 1/4" | 35 | 0.9 | P101621 |
| PGY 35 ESD-G Top Exit | 1–3.4 | 500–1500 | Trigger | Hex 1/4" | 35 | 0.9 | P101800 |
| PGY 50 ESD-G | 2–4.9 | 400–1100 | Trigger | Hex 1/4" | 35 | 0.9 | P102025 |
| PGY 50 ESD-G Top Exit | 2–4.9 | 400–1100 | Trigger | Hex 1/4" | 35 | 0.9 | P101627 |
| PGY 100 ESD-G | 4–9.8 | 250–500 | Trigger | Hex 1/4" | 35 | 0.95 | P102683 |
| PGY 100 ESD-G Top Exit | 4–9.8 | 250–500 | Trigger | Hex 1/4" | 35 | 0.95 | P104377 |
GYA series - Brushless spindlesController: XT-35D |
|||||||
| GYA 35 ESD-G V2 | 1–3.4 | 500–1500 | External I/O | Hex 1/4" | 35 | 0.95 | P102320 |
| GYA 50 ESD-G V2 | 2–4.9 | 400–1100 | External I/O | Hex 1/4" | 35 | 0.95 | P102492 |
| GYA 100 ESD-G V2 | 4–9.8 | 250–500 | External I/O | Hex 1/4" | 35 | 0.95 | P100489 |
GA series - Brush straight screwdriversController: XS-38D or XT-30D V2 |
|||||||
| GA 150 ESD | 0.08–0.78 | 700 / 1000 | Lever | Hex 1/4" | 30 | 0.31 | P102902 |
| GA 150P ESD | 0.08–0.78 | 700 / 1000 | Push to start | Hex 1/4" | 30 | 0.31 | P105867 |
| GA 180 ESD | 0.1–1.18 | 450 / 700 | Lever | Hex 1/4" | 30 | 0.31 | P100350 |
| GA 180P ESD | 0.1–1.18 | 450 / 700 | Push to start | Hex 1/4" | 30 | 0.31 | P102021 |
DO series - Brush straight screwdriversController: XS-38D |
|||||||
| DO 250 ESD | 0.2–2.45 | 630 / 1050 | Lever | Hex 1/4" | 38 | 0.72 | P101465 |
| DO 250P ESD | 0.2–2.45 | 630 / 1050 | Push to start | Hex 1/4" | 38 | 0.72 | P102698 |
| DO 350 ESD | 0.2–3.43 | 460 / 750 | Lever | Hex 1/4" | 38 | 0.72 | P101184 |
| DO 350P ESD | 0.2–3.43 | 460 / 750 | Push to start | Hex 1/4" | 38 | 0.72 | P103182 |
| DO 450 ESD | 0.3–4.41 | 330 / 550 | Lever | Hex 1/4" | 38 | 0.72 | P100817 |
| DO 450P ESD | 0.3–4.41 | 330 / 550 | Push to start | Hex 1/4" | 38 | 0.72 | P101788 |
Every screwdriver except the GXD series runs on a DOGA controller. Mains voltage, output voltage and current, weight, dimensions and code:
| Controller | Mains (V AC) | Output (V) | Current (A) | Weight (kg) | Dimensions (mm) | For | Code |
|---|---|---|---|---|---|---|---|
| XS-40D | 220 | 30 / 40 | 3 | 0.86 | 200 × 115 × 65 | GX series | P100001 |
| XS-40D FA | – | – | – | – | – | GXA spindles, automated stations | – |
| XT-35D | 230 | 35 | 4 | 2.4 | 95 × 221 × 143 | GY, PGY, GYA series | P100043 |
| XS-35D | 220 | 35 | 4 | 1.2 | 200 × 115 × 65 | GX BT series | P100050 |
| XS-38D | 230 | 30 / 38 | 2.5 | 0.71 | 200 × 115 × 65 | GA and DO series | P100106 |
| XT-30D V2 | 230 | 30 | 1.2 | 0.27 | 140 × 70 × 40 | GA series | P100927 |
| POKA-YOKE Scout II | – | – | – | – | – | counting controller for XS-35D, XT-35D and XS-40D (up to 4 screwdrivers) | P100256 |
The DOGA hybrid tools have a built-in air clutch controlled through a pressure sensor and a microprocessor, with up to 8 tightening programs (torque, speed, angle, soft start, torque tuning), USB port and error display. Models HD150A (0.5–1.5 N·m, 500–1800 rpm) and HD450A (1.5–4.4 N·m, 300–600 rpm) with the HDC-40i hybrid controller.
→ DOGA electric shut-off screwdrivers catalogue GX, GY, GA, DO (PDF, English, 17 MB)
→ Ask us which DOGA screwdriver and controller fit your application
InterElectronic supplies DOGA electric screwdrivers, controllers and accessories in Hungary and the region.
