ASH Quantum

Quantum

A New Category Field Of View Measuring System

Quantum is a fully integrated, easy to use, reliable and efficient 2D video measurement system with no requirement for a PC. Advanced digital image processing technology and unprecedented Multiple FOV ranges reduces measurement time and eliminates operator variances.

Customer Benefits

Eliminate subjectivity
Significantly improve inspection time
Tenfold increase in throughput
Automatically create, save and export excel reports for easy documentation and traceability

Intuitive User Interface

Program And Test

Program

There Are 6 Easy Steps To Allow You To Program Your Parts/Setup Your Measurements.

Step One: Open new part
Step Two: Select Field of View which best suits the size of the part
Step Three: Set focus point
Step Four: Set the optimal lighting conditions for the part
Step Five: Define the edges of the part to ensure readiness for measurement
Step Six: Ready to perform measurements as outlined in the Measurement Suite section

Test

The Test Option Allows You To Perform Automatic Testing Of Production Parts.

Test your part against a master golden template to automatically identify defects.
Simply load the test part, run the test and the results are clearly displayed on the screen. Results can be captured and exported to an Excel document for documentation and traceability.

Measurement Suite

Quantum has a wide range of measurement capabilities, such as Horizontal Dimension, Vertical Dimension, Horizontal Dimension 2 Point, Vertical Dimension 2 Point, Dimension 2 Point, Dimension (not axis tied), Best Line Fit with Dimension, Best Fit Circle with Dimension Diameter, Angle, Angle without Origin, Spline, 3 Point Arc with Radius Dimension, Polygon Area, 3 Point Perpendicular Dimension.

			Horizontal Dimension Allows the user to draw horizontal dimension measurements				Spline Allows the user to measure samples with non-linear lengths

			Vertical Dimension Allows the user to draw vertical dimension measurements				Angle Without Origin Allows the user to measure an angle without the need for a defined origin (useful for measuring parallelism of a part)

			Dimension (Not Axis Tied) Allows the user to measure a dimension without an axis				3 Point Arc With Radius Dimension Allows users to define and measure the radius of an arc

			Best Line Fit With Dimension Aids users to define the length of a part with an uneven edge				Best Fit Circle With Dimension Allows the user to define multiple points on a circle radius measurement. The greater the number of points defined the greater measurement accuracy

			Angle Allows the user to measure angles (angle with origin)				Best Fit Circle With Dimension Diameter Allows the user to define multiple points on a circle diameter measurement. The greater the number of points defined the greater measurement accuracy

			Horizontal Dimension 2 Point 2 Point Horizontal Measurement. Does not require mouse left click hold and drag				Polygon Area Allows users to define and measure an area of an irregular shape. Particularly useful for the polymer industry, such as measuring the area of a wire shielding section

			Vertical Dimension 2 Point 2 Point Vertical Measurement. Does not require mouse left click hold and drag				Skew Allows the user to set part alignment correction to the X axis on a part that has been placed in the FOV. Quick and accurate horizontal or vertical measurements with confidence.

			Dimension 2 Point (Not Axis Tied) Allows user to measure a dimension on any axis. Does not require mouse left click hold and drag				Datum Datum can serve as a reference check to provide a precise depiction of a part, feature or an enhanced understanding of feature to feature relationships.

			3 Point Perpendicular Dimension Allows the user to measure the perpendicular distance between two planes

Quick Measurements & Data Sharing

Save and recall measurement and settings files for routine inspections.

Simultaneous automatic measurements to speed up inspection time.

PASS/FAIL tolerance judgement display for rapid identification of failures.

NFS connectivity for automatic transfer of results to the network.

Documentation and traceability.

Automatic Alignment

Automatic identification of part position & re-orientation: No need for a jig to position parts.

The position of a part is automatically identified and re-orientated to its programmed measurement position.

BEFORE

		RTLDC™ Real Time Lens Distortion Correction

AFTER

		Unique Technology Distortion is inherent in all lenses. Rather than correct this through optics, Ash have developed a digital solution. Quantum uses advanced algorithms to correct lens distortion on the live image. This results in consistent measurements across the entire field of view.

Technical Specifications

Lens	+5 lens with 5 fixed position zooms
FOV	134mm x 75mm @ L1 mag; 87mm x 49mm @ L2 mag; 46mm x 26mm @ L3 mag; 10mm x 6mm @ L4 mag; 4mm x 2mm @ L5mag;
Illumination	Quadrant controllable LED ring light; Sub-stage transmitted LED illumination
Image Capture	Internal Image Capture 16gb. Removable USB Image Capture Transfer Images to PC via USB Cable
Monitor Connections	HDMI/DVI
Power	24W
Monitor Requirements	HD Ready or Full HD (Recommended)
Dimensions	216mm x 125mm x 136mm
Input/Output	HDMI Out, USB 2.0 Port x 4, RJ45 Ethernet Connector (for networking), General Purpose IO x 3, DC Power Jack (24V)
Weight	1.75Kg
Temperature	Storage: -10 Celsius to +60 Celsius Operating: +5 Celsius to +40 Celsius